Click Fireworks to Enlarge

Skylighter Fireworks Tips November 13th, 2008 -- Issue #119 IN THIS ISSUE: How to Make a Model Ammonium Dichromate Volcano Volcano Science Project Kit 15% Off everything at Skylighter! Visit Skylighter's Project Plans

Making a volcano from ammonium dichromate has to be the fastest and easiest pyrotechnic project there is. The simplest volcano can be done in less than a minute. They look good in daylight and spectacular in the dark. Great for science projects or educational entertainment for your kids. Silent, safe, incredibly realistic.

Get the volcano kit this week and save money. Or include it in your order of $175 or more and knock 15% off your total order. Ends November 20, 2008.

How to Make a Model Ammonium Dichromate Volcano

Whether you are new to fireworking or a seasoned veteran it always pays to regularly study good pyro-safety guidelines and to notice whether or not your work habits are conforming to those recommendations.

Please refer to these links:

Fireworks Safety 101 by Kyle Kepley, intro by Ned Gorski

Fireworks Safety Manual, a collection of essays by Bill Ofca



A while back I received an email from Harry:

"Have you ever made an ammonium dichromate volcano? They are really popular with parents and teachers and look great daytime or night."

I responded: "Never learned how to make a volcano. Led a deprived childhood. No way they’re doin’ anything like that in science classes nowadays."

Making a volcano would, of course, be exactly the sort of school project which would capture the imagination of so many young students.

Harry shot back: "Neat little effect. The ammonium dichromate burns by itself, but you can add other fuels to make more lifelike 'lava.' For instance, charcoal 10 or 20-mesh. I imagine there's some flake titanium, ferro-titanium, etc. that would work as well. You could provide volcano formulas for high school projects."

Well, I was intrigued. I've made 16-inch ball shells and 36-inch girandolas, but never an ammonium-dichromate volcano. I couldn't let that stand for long. So I asked Harry to send me a few tubs of the ammonium dichromate, and I put it on my to-do list.

In the meantime, I did a little research on the Internet, and also found a couple of paragraphs about the volcano in the Skylighter Project Plans pages.

Warning: So, first off, a bit of a warning: Ammonium dichromate is rated as a hazardous toxic chemical on its MSDS. One should not inhale its dust, but that's not too tough to avoid since it comes as relatively large orange crystals, not a dust that gets easily airborne.

One should not ingest it. Well, Duh!

One should avoid skin contact. Wear rubber gloves if you're gonna touch the stuff (which is not necessary to create one of these volcanoes). Avoid eye contact. The stuff can cause cancer.

So, exercise appropriate caution with this chemical. If you're going to be making a volcano like this for a science fair, perform all actions and experiments with it outdoors, and when the volcano is "erupting" don't allow anyone to breathe the small amount of smoke and ash, which rises off of it.

Use common sense. I know, I know. Common sense is not in common use nowadays to protect folks from harm. Since everything even remotely dangerous is becoming illegal, folks are increasingly being born with no common sense chip. But, use common sense anyway. There, you see? You got me started.

The scientific stuff: science for kids - old and young

I’m not much of a chemist, but I did find this information interesting, and some other folks might as well.

Ammonium dichromate is sometimes referred to as Vesuvian Fire due to its use in the creation of these small volcano replicas.

Ammonium dichromate's formula is (NH₄)₂Cr₂O₇.


When it burns, it decomposes according to the following equation:

(NH₄)₂Cr₂O₇ (solid) -> Cr₂O₃ (solid) + N₂ (gas) + 4H₂O (gas)

The gaseous byproducts are simple nitrogen gas and steam, so they are innocuous.


The solid product is chromium (III) oxide. What remains after the volcano burns is this solid, grayish-green ash. The chromium in it is toxic and possibly carcinogenic, so care should be exercised when handling it and disposing of it. Some of this ash flies up into the air when the volcano is burning, so you don’t want anyone close enough to it to breathe the stuff.

The chromium oxide can reportedly be used in a thermite reaction to produce elemental chromium metal, so I'm going to save the chromium oxide ash to try to use it in such a reaction, since I am planning an article on thermite reactions.

A volcano project

I decided to go simple, and make a "volcano" out of a can and heavy-duty aluminum foil. I formed a lip at the bottom of the aluminum foil "cone" to catch the ash as it formed.


I lit the top of the ammonium dichromate with a propane torch, and it burned and created a "volcano" effect, but at times the flame went deep into the orange crystals, down the sides of the can, and propelled some of the crystals up and out of the can, unburnt. I was not completely pleased with the effect that was produced.

So I decided to try a shallow, tuna-fish can, sitting on top of the pop can.


This volcano burned a little better than the first one, but still the flame worked its way down the sides of the can, and the ammonium dichromate did not burn evenly. I still was not satisfied.

I also noticed that igniting the ammonium dichromate with the propane torch was not all that easy. The pressure of the propane blew the crystals out of the way of the flame, and although some of them eventually lit and initiated the desired continuing reaction, the pile did not ignite right at the top of the heap.

So, I decided to try something really simple. I made a "tray" out of flat aluminum foil with the edges turned up to catch the ash. I poured a cone of about a half-pound of the ammonium dichromate in the middle of the foil tray, and inserted a 6-inch length of Visco-fuse into the middle of the pile of orange crystals.


Once the Visco fuse burnt down into the cone of crystals, they ignited and a nice volcano-action formed and burned until only ash remained.

Well, then I thought that the way to get this baby really looking like a volcano, but still burn like it did in this last test, was to form the aluminum foil over the cans, but not cut the opening. I just piled the ammonium dichromate on top of this "mountain" on the flat section and inserted another piece of Visco.


I was really pleased with how this volcano looked and performed.


I think it almost looks like the real thing with glowing, flaming lava flowing down the side of the Mt. St. Gorski.

Making model volcanoes this way uses about 1/4 pound of the crystals per volcano.

Nighttime volcanoes

I thought I'd make a few other versions of the ammonium dichromate volcano at night.

For the first one, I repeated the procedure I followed in the last daytime test. This looked pretty cool as the "lava" burned and flowed down the sides of the "mountain."

Honestly, I like watching the volcano better in the daytime when I can see the greenish ash being formed and flowing down the sides of the hill.


For the second nighttime volcano, I did the same as above except I stirred in a tablespoon of 36-mesh charcoal to see what sort of effect that would produce.

As this volcano burned, a lot of orange, charcoal sparks rose up into the air above it, creating an effect that was different than the standard, ammonium dichromate-only volcano.


For the third nighttime test, I mixed in about a tablespoonful of medium flake aluminum, and for the fourth and final test I added about a teaspoon of fine spherical titanium.

The addition of these metal fuels seemed to slow down the burning reaction, and did not produce the silver-white sparks, that I was half-expecting. There was an interesting, different sort-of molten flowing effect, as the reaction seemed to almost melt the ammonium dichromate and metal together, causing molten "lava" to flow down the mountain.

As a last offering to the pyro-gods, I simply poured about a half-pound of the ammonium dichromate onto a bare patch of ground and lit it with the propane torch.


This caused the little volcano crystals to ignite from the sides and burn toward the center, and this was probably my favorite effect of the night. (After it, I had to get a shovel and completely clean up the green ash from the area.)

Conclusion

This was a fun little science project. I saved some of the ammonium dichromate for when my grandkids visit, and I'll introduce them to something they’ll probably never have the chance to see in science class. And there’s enough left to show them how to make a school project volcano just in case that time comes.

I learned something today working on this model volcano, and that's never a bad thing.

Take care and have fun,

Ned
ngorski@skylighter.com



Get everything you need to make a realistic daytime or nighttime model volcano, and save 39%. This ammonium dichromate volcano project, sometimes called a "Vesuvian Volcano" is perfect for high school and other science projects. It creates sparks and ash just like a real volcano. It's safe, quiet, and entertaining for kids from 3 to 100.

	Retail Value
Ammonium Dichromate, 2 pounds	$49.56
Aluminum Flake, 1 pound	11.47
Charcoal, 36-mesh, 1 pound	5.70
Total Retail Value	$66.73
Order now for just	$40.80
Savings	$25.93

Volcano Science Poject Kit, #KT3010

$40.80

15% Off everything at Skylighter!

$175 minimum order
Sale ends midnight Eastern time, Thursday, November 20, 2008

Plus

Order before midnight (Eastern time) Monday, November 17, 2008 and get 3 bonus gifts,

FerroTitanium, -60+100 mesh, 1 pound
A 28.95 value

FerroTitanium makes a rich, thick spray of fine straw-yellow sparks, perfect for stars, comets, rockets and fountains.

Bonus Gift #2
The 2007 International Fireworks Trade Directory
A $68.24 value



The International Fireworks Trade Directory lists every known fireworks company in every country in the world. It is the only such directory in existence listing:

• Fireworks display companies
• Fireworks manufacturers
• Fireworks importers
• Fireworks lawyers
• Fireworks consultants
• Fireworks clubs
• Fireworks supplies companies

Bonus Gift #3
A DVD of the 2006 Pyronale World Championship of Fireworks
A $29.95 value


The incredibly beautiful Pyronale fireworks competition is held every year at the Olympic stadium in Berlin. Display companies from all over the world show off their very best fireworks and choreography.


Awards are given for overall impression, originality and choreography. This DVD includes 60 minutes of the four best shows of Pyronale 2006. If you have never been to a world-class fireworks competition, you owe it to yourself to take a look at this DVD. These shows are not only hugely entertaining they'll give you great ideas for your next display.

So jump right now to get:

• 15% off everything at Skylighter.com
• FerroTitanium, -60+100 mesh, 1 pound (28.95)
• International Fireworks Trade Directory ($68.24)
• Pyronale Fireworks Competition DVD ($29.95)

That's a total savings of $153.39 just for going to the link below before midnight Eastern time, Monday, November 17, 2008.

Here's how you can get everything above.