Skylighter - Fireworks Making Products - Plastic Shell Building Accessories

Table of Contents>> Fireworks Making Products - Plastic Shell Building Accessories

We feature the following Fireworks Making Products - Plastic Shell Building Accessories. Click on a product to view more detailed information:

PL4002 Flash Bag Plastic Tubes

8 of each size: 3/8 inch ID, 1.3 inch ID, 1.5 inch ID. All are 20 inches long. Cut these translucent, thin, flexible tubes with scissors to fit the shell you're making, hot glue them in, fill, and tape/crimp the top shut.

CH8193 Methylene Chloride

For bonding plastic parts together.

MS1101 Shell Warning Labels

5-1/4 inch x 2-1/8 inch. Warning message; room to write shell description. Red, black, and white meets NFPA requirements.

TL4000 Solvent Applicator

1-1/4 ounce, oval shaped, polyethylene squeeze bottle with a 1 inch long, hollow, steel needle and a dust-proof cap that retards evaporation. Reusable.

TL4001 Wool Dauber

Use it to apply methylene chloride, xylene, or thickened methylene chloride or xylene to your plastic shell halves. Each dauber has a wire loop handle, is five inches long, and has a little half-inch-diameter ball of wool on the end for all your dau...