3D Print Files

This rocket fin and nose cone set are compatible with either TU2005 OR TU2007 1oz. rocket tubes. The fin can is a snug fit, however, variances in p...

37mm 2", 3", & 5" Shell Casings Model For Flare Launcher WARNING! These models are not suitable for real-world use out of the box as a 3D-pri...

This design is a payload cup for 3"+ shells for 37mm flare launchers. 1.35" OD For 3"+ Shell WARNING! These models are likely not suitable for re...

The TU1375 (1" ID x 6" Length) makes a great small mortar tube along with this base and is suitable for launching small shells made from the TU2032...

Fuse plug for converting the TU2032 (.780" ID x 2" Length) into a small shell suitable for backyard displays. The fuse hole is compatible with 2-3m...

Solid plug for converting the TU2032 (.780" ID x 2" Length) into a small shell suitable for backyard displays. The plug is a tight fit and can be u...

Fuse plug for converting the TU2032 (.780" ID x 2" Length) into a small shell suitable for backyard displays. The fuse cavity can be packed with st...

Nose cone fits many fireworks bottle rocket brands.   Designed By: rebeltaz

Fin set fits many fireworks bottle rocket brands.   Designed By: rebeltaz

The rocket is designed to use Estes motors which are either 18mm or 24mm in diameter (B, C, D series motors). You can buy rocket motors on the inte...

Concept for Round shell casing filled with exploding stuff. . Great for smoke bombs and ground effects if printed using PLA. For an aerial shell pr...

37mm Payload Cups - Multiple Configurations - 1.295" OD / 1" ID   WARNING! These models are likely not suitable for real-world use out of the bo...

37mm Powder Bushing / Cup 40 Grain Capacity For Reloadable Shells For Flare Launcher Use WARNING! These models are not suitable for real-world use...

This design is a payload cup for 3"+ shells for 37mm flare launchers. 37mm Payload Cup - 1.350"OD x 1" ID For 3" Shell Flare WARNING! These model...

Here are several different style nose cones meant to replace the lid of a 35mm film canister. Specifically the style of 35mm film canisters commonl...

The 3D Printed Mini Shells Supplies Kit contains all of the supplies you need to assemble 100 mini-shells and 5 mini-mortars, plus it contains an a...