Fountains
These videos show you some of the steps used to make two different types of fireworks fountains using a black powder base mix and either 80-mesh charcoal or ferro-titanium for sparks.
If you would like to learn to make fireworks in as little as one weekend check out the Turbo Pyro Kit and accompanying eBook.
Finished Fountains
Examples of the two types of fountains made in this project, an 80-mesh charcoal fountain and a ferro-ti fountain.
Weighing & Mixing Fuel
How to weigh out and mix the black powder base mix and spark additives for two different types fountains.
Ramming Nozzle
How to hand ram a bentonite clay nozzle for your fountains using the Turbo Pyro tooling.
Marking Drift
Where to mark a no-pass line on your solid drift so you know when to switch from the hollow rammer to the solid rammer.
Ramming Fuel
How to safely hand ram fountain fuel using the Turbo Pyro tooling.
Ramming Bulkhead
Ramming a bentonite clay bulkhead in your firework fountain using the Turbo Pyro tooling.
Installing Fuse
Installing visco fuse and a stick onto your firework fountain for safe lighting.
Fountain Fan
A fan of three ferro-titanium fountains firing at once.
If you would like to learn to make fireworks in as little as one weekend check out the Turbo Pyro Kit and accompanying eBook.