Want to be featured on Skylighter?
If you would like your files posted here please contact Skylighter via the contact us page and submit your files along with a detailed description.
-
Solid Plug for TU2032 - Mini Shell
Solid plug for converting the TU2032 (General Purpose, Spiral Tube - 0.78"-ID x 2"-LEN) into a small shell suitable for backyard displays. The plug is a tight fit and can be used as-is for flying fish fuse or glued in place for use with a break charge.
Recommended Print Settings: Layer Height: 0.3mm, Nozzle: 0.4mm, Side: 4-walls, Top and bottoms: 5-layers, Infill: 50%, Print Orientation: Widest Area DownDesigned By: Skylighter.comDownload STL File -
Fuse Plug for TU2032 - Mini Shell
Fuse plug for converting the TU2032 (General Purpose, Spiral Tube - 0.78"-ID x 2"-LEN) into a small shell suitable for backyard displays. Fuse hole compatible with 2-3mm visco fuse and some effect fuses. The fuse should be wrapped with masking tape to form a tight seal and retard side spit. Hot glue is recommended. The plug is a tight fit and can be used as-is for flying fish fuse or glued in place for use with a break charge.
Recommended Print Settings: Layer Height: 0.3mm, Nozzle: 0.4mm, Side: 4-walls, Top and bottoms: 5-layers, Infill: 30-100%, Print Orientation: Widest Area DownDesigned By: Skylighter.comDownload STL File -
Rising Effect Plug for TU2032 - Mini Shell
Fuse plug for converting the TU2032 (General Purpose, Spiral Tube - 0.78"-ID x 2"-LEN) into a small shell suitable for backyard displays. The fuse cavity can be packed with star comp such as Red Rubber Star or D1 Glitter to provide a rising effect. Compatible with 2-3mm visco fuse. The fuse should be wrapped with masking tape to form a tight seal. Hot glue is recommended. The plug is a tight fit but should be glued in place.
Recommended Print Settings: Layer Height: 0.3mm, Nozzle: 0.4mm, Side: 4-walls, Top and bottoms: 5-layers, Infill: 50-100%, Print Orientation: Cavity DownDesigned By: Skylighter.comDownload STL File -
Mortar Base for TU1375
The TU1375 (Spiral 3# Double Voice Cracker Tube - 1:-ID x 6"-LEN) makes a great small mortar tube along with this base and is suitable for launching small shells made from the TU2032 (General Purpose, Spiral Tube). Base in a nice snug fit but should be glued or stapled in place before use.
Recommended Print Settings: Layer Height: 0.3mm, Nozzle: 0.4mm, Side: 5-walls, Top and bottoms: 6-layers, Infill: 50-100%, Print Orientation: Base DownDesigned By: Skylighter.comDownload STL File -
1 Ounce Mini Rocket Fin and Nose Cone Set.
This rocket fin and nose cone set are compatible with either TU2005 OR TU2007 1OZ. rocket tubes. The fin can is a snug fit, however, variances in printer calibrations are impossible to account for and you may need to scale up or down 1-2% in your preferred slicer. The nose cone is a two-part design for ease of print and should be glued together with a dab of super glue. Note: Nose cone coupler also serves as a tube coupler with built-in visco fuse pass-through hole.
Recommended Print Settings: Layer Height: 0.3mm, Nozzle: 0.4mm, Side: 2-walls, Top and bottoms: 2-layers, Infill: 25%, Print Orientation: All parts uprightDesigned By: Skylighter.comDownload STL File -
35mm Film Canister Nose Cones / 37mm Bushings
Here are several different style nose cones meant to replace the lid of a 35mm film canister. Specifically the style of 35mm film canisters commonly found for sale with a knurled lid. This style film canister usually comes in clear and black and you can find them on eBay for cheap(they typically ship from China in qty of 10).
Designed By: TactedOutDownload STL File -
37mm Finned Payload Cup 1.350"OD for 3"+ Shell Flare Launcher Round
This design is a payload cup for 3"+ shells for 37mm flare launchers.
WARNING! These models are likely not suitable for real world use out of the box as a 3D printed item. A better although untested option would be using the 3d printed models to make molds and then using the molds to cast the item using in more suitable material.Designed By: TactedOutDownload STL File -
37mm Payload Cup 1.350"OD/1"ID for 3" Shell Flare Launcher Round
This design is a payload cup for 3"+ shells for 37mm flare launchers.
WARNING! These models are likely not suitable for real world use out of the box as a 3D printed item. A better although untested option would be using the 3d printed models to make molds and then using the molds to cast the item using in more suitable material.Designed By: TactedOutDownload STL File -
37mm 2", 3", & 5" Shell Casings Model for Flare Launcher
WARNING! These models are not suitable for real world use out of the box as a 3D printed item. Though they may be accurate enough models to be machined out of aluminum. When printed(for testing dimensions only) they accept a 209 primer with some tension and fit well in the chamber area. They may be suitable to use as snap caps if there were a need for such a thing using a SPENT 209 primer with some epoxy filling the firing pin dent.
Designed By: TactedOutDownload STL File -
37mm Powder Bushing / Cup 40 Grain Capacity for Reloadable Shells for Flare Launcher Use
WARNING! These models are not suitable for real world use out of the box as a 3D printed item. A better though untested option would be using these printed models to make a mold and then casting the models using a more suitable material and even so it is not recommended.
Designed By: TactedOutDownload STL File -
37mm Payload Cups - Multiple Configurations - 1.295"OD/1"ID for Flare Launcher Round
WARNING! These models are likely not suitable for real world use out of the box as a 3D printed item. A better although untested option would be using the 3d printed models to make molds and then using the molds to cast the item using in more suitable material.
Designed By: TactedOutDownload STL File -
Artillery Shell Firework Case
Concept for Artillery shell casing fill with exploding stuff. Printed PLA layers make for a poor shell. Failed Ground test
Designed By: WalnettoDownload STL File -
Modular Rocket for Estes motors
The rocket is designed to use Estes motors which are either 18mm or 24mm in diameter (B, C, D series motors). You can buy the rocket motors on the internet or at good model shops.
Designed By: Leslie KayeDownload STL File -
Bottle Rocket Fireworks Fin Set
Fin set fits many fireworks bottle rocket brands.
Designed By: rebeltazDownload STL File -
Bottle Rocket Fireworks Nose Cone
Nose cone fits many fireworks bottle rocket brands.
Designed By: rebeltazDownload STL File