Shell Parts

2-1/4" spherical plastic shells make 2-1/2" #100 shells when pasted and fused. Come in two halves, one with 3/32" fuse hole. Shell halves seal toge...

2-1/4" spherical plastic shells make 2-1/2"  #50 shells when pasted and fused. Come in two halves, one with 1/4" fuse hole. Shell halves seal toget...

1-5/8" spherical plastic shells make 2" shells when pasted and fused. Come in two halves, one with a 3/32" fuse hole. Shell halves seal together wi...

These cylindrical plastic shells are 1-15/16" before pasting. They come in two parts, the can and the lid. The lid has a 3/32" visco fuse hole. Met...

These cylindrical plastic shells are 1-15/16" before pasting. They come in two parts, the can and the lid. The lid has a 3/32" visco fuse hole. Met...

These cylindrical plastic shells are 1-15/16" before pasting. They come in two parts, the can and the lid. The lid has a 1/4" visco fuse hole. Meth...

These bombettes come in two parts, the can and the lid. The lid has a 1/4" visco fuse hole. Bombettes can be used as timed inserts or individual mi...

Make your first aerial shells from start to finish in an hour or less! This kit uses plastic shells which are glued and taped. They make a beautifu...

1" OD spherical plastic shells with plastic lift cup molded to bottom halves. Comes in two halves, the bottom one with 3/32" fuse hole. Shell halve...

1" Wide Gummed Kraft Tape 500 Foot Roll Part #MS1501 Commonly used for pasting shells to give a nice even break as well as other fireworks proje...

1" Wide Pre-activated Gummed Tape 500 Foot Roll Part #MS1502 Commonly used for pasting shells to give a nice even break as well as other firewor...

1-1/2" Wide Gummed Kraft Tape 500 Foot Roll Part #MS1503 Commonly used for pasting shells to give a nice even break as well as other fireworks p...

1-1/2" Wide  Pre-activated Gummed Tape 500 Foot Roll Part #MS1504 Commonly used for pasting shells to give a nice even break as well as other fi...

1-1/8" OD spherical plastic shells with plastic lift cup molded to bottom halves. Comes in two halves, the bottom one with 3/32" fuse hole. Shell h...

These tubes were made to be used in consumer fireworks ("Class C") mortar tubes. There's no "standard" consumer mortar tube size. So, be sure and m...

These paper hemispheres come in sets of 2 halves and are approximately 1.55" in diameter before pasting.  20 sets Part #PS2017

These paper hemispheres come in sets of 2 halves and are approximately 1.45" in diameter before pasting.  20 sets Part #PS2015

These paper hemispheres come in sets of 2 halves and are approximately 1.75" in diameter before pasting.  20 sets Part #PS2020

These paper hemispheres come in sets of 2 halves and are approximately 2.1" in diameter before pasting.    These shells will fit the 10pk Cut Tub...

These paper hemispheres come in sets of 2 halves and are approximately 2.5" in diameter before pasting.  20 sets Part # PS2030

4-inch paper fireworks shell hemispheres. These paper hemispheres come in sets of 2 halves. They're approximately 3-5/8" in diameter before pasting...

These high-quality kraft paper hemispheres come in sets of 2 halves, they're 4-1/2" in diameter before pasting. 10 sets Part #PS2050

These paper hemispheres come in sets of 2 halves, they're 5-1/2" in diameter before pasting. 10 sets Part #PS2060  

These high quality paper hemispheres come in 2 sets of 2 halves each. They're about 7-1/4" in diameter before pasting. 2 sets Part #PS2080