Products

 26.5mm Acetal Plastic Hulls. For use with #209 shotgun primer. Empty re-loadable 26.5mm flare hulls. Accepts standard 209 shotgun primer. You can...

Get ready to ignite with our 2in. Pre-Cut 1.6 Safety Fuse! With a 30 second burn time for every foot, this fuse is perfect for all your pyrotechnic...

3" ID x 15 inches long with wooden plug in bottom. These HDPE Mortar Tubes are Black or Orange depending on current availability. IMPORTANT: Firin...

3" ID x 18" (+/- 1/4") long, approx. 1/8" wall, with fiberglass resin plug in the bottom and structurally reinforced lip to prevent fraying. Approx...

These paper hemispheres come in sets of 2 halves and are approximately 2.5" in diameter before pasting.  20 sets Part # PS2030

Spherical plastic firework shells, two halves, one with 7/32" fuse hole. Includes fuse washer and leader ring. These shells are to be used a 3" Mo...

Spherical plastic fireworks shells, 3" in diameter when pasted and fused. Comes in two halves, one with a 7/32" time fuse hole, one with leader hoo...

These brilliant red fireworks fountains can be made in minutes and used immediately. This is one of the best kits to use to learn fireworks making....

Stinger Missile fireworks (sometimes called Zips) are spin-stabilized fireworks rockets that use black powder fuel. When you light them, the rocket...

3 Pound Black Powder Rockets are easy to make. You can make them fast using this black powder rocket tooling and a simple mallet--no expensive pres...

       The Double Voice Cracker is a simple device that simulates an aerial shell, without the need of a mortar tube.  With this tool set you can i...

Theses heavy duty tubes are custom designed to work with our 3-Pound Double Voice Cracker tool set.  These tubes come in a pack of 25. Dimensions:...

Each tool set contains: - 1 Aluminum base, with bottom set allen head screw - 1 Stainless steel spindle, removable - 1 Hollow aluminum drift (r...

4-Pack of 3-inch lightweight, fanned, 5-shot mortar racks. Perfect for mines, finale strings, and anywhere you want to fill the sky with 3-inch she...

Make paper cylinder shells as fast as plastic without all the plastic scrap waste to clean up after the display. These paper cylinder sets have a t...

3" Paper Lift Cups 20 Pieces Part #PC1180

3-Pack of 10-shot, light-weight, vertical mortar racks, perfect for adding 3-inch shells to your display without having to build racking.  For som...

This kit contains enough 3-inch plastic shell parts and fuse to make 15 shells and a mortar tube to fire them out of. You supply the black powder a...

This refill kit has enough tubes, chemicals, and fuse to make 25 complete 3/4-Inch Stinger Missiles with silver titanium tails. But no tooling is i...

 37mm Acetal Plastic Hulls. For use with #209 shotgun primer. Empty re-loadable 37mm flare hulls. Accepts standard 209 shotgun primer. You can use...

Introducing our 37mm to 12 gauge flare adapter, designed to enhance your shooting experience. This adapter allows you to easily convert your 37mm f...

This rocket fin and nose cone set are compatible with either TU2005 OR TU2007 1oz. rocket tubes. The fin can is a snug fit, however, variances in p...

Here are several different style nose cones meant to replace the lid of a 35mm film canister. Specifically the style of 35mm film canisters commonl...

This design is a payload cup for 3"+ shells for 37mm flare launchers. 1.35" OD For 3"+ Shell WARNING! These models are likely not suitable for re...

This design is a payload cup for 3"+ shells for 37mm flare launchers. 37mm Payload Cup - 1.350"OD x 1" ID For 3" Shell Flare WARNING! These model...

37mm Payload Cups - Multiple Configurations - 1.295" OD / 1" ID   WARNING! These models are likely not suitable for real-world use out of the bo...

37mm Powder Bushing / Cup 40 Grain Capacity For Reloadable Shells For Flare Launcher Use WARNING! These models are not suitable for real-world use...

37mm 2", 3", & 5" Shell Casings Model For Flare Launcher WARNING! These models are not suitable for real-world use out of the box as a 3D-pri...

Fin set fits many fireworks bottle rocket brands.   Designed By: rebeltaz

Nose cone fits many fireworks bottle rocket brands.   Designed By: rebeltaz

Fuse plug for converting the TU2032 (.780" ID x 2" Length) into a small shell suitable for backyard displays. The fuse hole is compatible with 2-3m...

The rocket is designed to use Estes motors which are either 18mm or 24mm in diameter (B, C, D series motors). You can buy rocket motors on the inte...

The TU1375 (1" ID x 6" Length) makes a great small mortar tube along with this base and is suitable for launching small shells made from the TU2032...